Goodman is one of the biggest names in home cooling, heating and energy-efficient home comfort. That’s because Goodman lives up to its name in a big way, with time-tested energy-efficient technology, highly durable materials and spot-on manufacturing. So, no matter where you live or whether your home is small or large, Goodman probably has a solution to help keep your home comfortable. 

This heat pump requires an indoor air handler or evaporator coil as part of a complete system. What tonnage coil or air handler should you use? It depends on two factors about the outside portion of the heat pump system: 1) the tonnage, and 2) the efficiency rating (listed as "SEER"). Usually, high efficiency heat pumps are required to use a larger tonnage evaporator coil than the tonnage of the outside heat pump. (For example, a 2 ton heat pump might be paired with a 3 ton or 3.5 ton evaporator coil.) To find the specific coils or air handlers that are recommended by Goodman for this heat pump, please click on the Accessories tab above. (Also, you can view Goodman's specifications sheets at the Documents tab above).

In order to achieve the 20 SEER efficiency this heat pump must be installed with the manufacturer recommended evaporator coil, a Goodman variable speed furnace, variable speed air handler, or variable speed modular blower and thermostatic expansion valve (TXV). (See the Accessories tab above for most compatible products, or Goodman's spec sheet found under the Documents tab above to verify heat pump efficiency with particular equipment combinations.)m.

Need help putting a complete heat pump system together? Use our easy System Selector and we’ll do it for you!

This is a communicating piece of equipment and to achieve full efficiency and functionality it must be paired with a Goodman communicating furnace, or modular blower with evaporator coil.

When pairing this unit with a Goodman communicating indoor natural gas/lp furnace in a dual fuel installation all of the staging is done through the communication between the furnace and heat pump and no specialized thermostat is required.

Please note that this heat pump comes pre-charged with R-410A liquid refrigerant and by Federal law cannot be released to the atmosphere. You can purchase this equipment without being EPA certified, and if you are mechanically inclined you may perform about 90% of the equipment installation yourself. However we strongly recommend to have a professional heating/cooling contractor do the final part of the installation including managing the refrigerant. An HVAC contractor has the tools and know-how to do this work. Also, having a contractor perform the final startup and inspection of this heat pump validates your warranty with Alpine. The manufacturer recommended line set diameters must be used with the Goodman inverter systems to ensure proper functionality. 

Standard Features:

• Variable-speed swing compressors 
• High-density compressor sound blanket 
• Integrated communicating ComfortBridge™ Technology 
• Commissioning and diagnostics via indoor board Bluetooth  with the CoolCloud™ phone and tablet application
• Goodman control algorithmic logic
• In communicating mode, only two low
• voltage wires to outdoor unit required
• Diagnostic indicator lights, seven-segment  LED display, and fault code storage
• Field-selectable boost mode increases
• compressor speed during unusually high loads
• Quiet DC outdoor fan motor
• Fully charged for 15’ of tubing length
• Field-installed bi-flow filter drier
• Coil and ambient temperature sensors
• Suction pressure transducer (in cooling mode)
• Sweat connection service valves with easy access to gauge ports

Cabinet Features:

• Heavy-gauge galvanized-steel cabinet with grille-style sound control top design 
• Custom two-tone gray powder-paint finish  
• 500-hour salt-spray tested 
• Wire fan discharge grille 
• Steel louver coil guard 
• Top and side maintenance access
• Single-panel access to controls with space  provided for field-installed accessories 
• When properly anchored, it meets the 2017  Florida Building Code unit integrity  requirements for hurricane-type winds  (Anchor bracket kits available.) 

Considering purchasing a furnace, air handler, or coil with this condenser? Visit our Central Heating & Cooling Systems page to find AHRI certified systems.