When you consider a Blueridge system, quality and value are a given. You’re getting peace of mind with great features and a smart design—and best of all, you get it right now. When you think about everything Blueridge delivers, your decision is easy. With Blueridge, all your heating and cooling questions are answered. The performance and reliability you want are right here, and ready to go to work. 

Blueridge heat pumps are built in North America for an unbeatable combination of quality and price. They provide highly efficient, powerful cooling, during hot weather, and when the weather turns cold, onboard technology reverses the refrigerant cycle to provide heat, and at a fraction of the cost of many alternative heat sources.  

This system consists of a heat pump and matching air handler. They are designed to work together and are rated at 15.8 SEER2 efficiency. Blueridge heat pumps and air handlers are designed with reliability, ease of maintenance and installation in mind.

In most parts of the country you will need to install a heater coil in the air handler for auxilary heating during the coldest times of the year. The matching heater coils, line sets, and other install components are in accessories section below.

We design our system bundles to provide homeowners and contractors with a new HVAC system in one simple purchase. If you'd like help picking out the best option for your needs, give us a call at 1 800 865 5931. Our system design consultants have decades of combined experience helping homeowners select the right equipment. If you have any questions, concerns or just need some guidance, please get in touch with us. We're here to help.

Heat Pump Standard Features:

• High-efficiency scroll compressor 

• R410A refrigerant 

• Grommet mounted compressor for quiet operation 

• Internally protected against high temperature motor overload conditions

• Full metal louvered panel with 2 screws to remove for ease of coil cleaning and service

• Corner-mounted controls for easy service

• Baked polyester paint finished over galvanized steel for maximum durability

• External gauge ports for easy service

• Removable service panel for internal access

• Omniguard™ total corrosion protection technology designed coil 

• Enhanced tube-and-fin coil design featuring MHT™ Technology 

• Lanced fins for maximum heat transfer 

• Factory tested for leakproof construction 

• Raised coil prevents debris from impeding airflow

• Factory installed high and low pressure switches

• Thread-on pressure switches with Schrader core for simple, quick replacement

• Factory installed filter drier

• Fan orifice for smoother airflow and sound level reduction

• Charged for 15 feet of line set

• Discharge muffler for quiet operation

• Quiet Shift™ capable to reduce noise during defrost

Air Handler Features:

• Variable Speed Blower motors

• Standard  transformer and blower relay

• Field installed 5 - 15kW electric heat kits with easy plug connections

• Blower time delay for increased efficiency

• Sleeves on distributor tubing to protect tubes

• Total corrosion protection coil

• Enhanced tube-and-fin coil design

• Lanced fins for maximum heat transfer

• Factory leak tested and pre-charged with nitrogen holding charge

• 1 piece design

• Smaller profile for tight application areas

• Multi position - Factory ready for upflow, downflow, and horizontal left/right applications

These components were selected by HVAC specialists to maximize their performance and efficiency. This system is certified under AHRI # 210325291 to give you 15.8 SEER

Please note that this heat pump comes pre-charged with R-410A liquid refrigerant and by Federal law cannot be released to the atmosphere. You can purchase this equipment without being EPA certified, and if you are mechanically inclined you may perform about 90% of the equipment installation yourself. However we strongly recommend to have a professional heating/cooling contractor do the final part of the installation including managing the refrigerant. An HVAC contractor has the tools and know-how to do this work. Also, having a contractor perform the final startup and inspection of this heat pump validates your warranty with Alpine. 

Click the links below to check each components' specifications and documentation.

This system includes: 

WARRANTY
10 year limited warranty with online registration
5 year limited warranty without online registration