The Goodman^® GSH14 Heat Pump features the high-efficiency Copeland^® scroll compressor that provides improved temperature and humidity control throughout the home. The GSH14 has an attractive louvered metal guard to protect the coil from damage and strengthen the unit, while the base pan elevates the unit above the slab for excellent water drainage. A powder-paint finish provides premium durability and improved UV protection.

All Goodman 14 / 15 SEER heat pumps must be installed with a bi-flow thermostatic expansion valve. This valve is installed in front of the indoor evaporator coil inline with the lineset piping.

This unit can be 14 or 15 SEER, depending on which indoor unit it is paired with. If it is installed with the manufacturer recommended evaporator coil, a Goodman variable speed furnace, variable speed air handler, or variable speed modular blower, and also sometimes a thermostatic expansion valve (TXV), it is a 15 SEER system (see mfg. spec sheet under "Instructions & Brochures" tab above for specifics). A 15 SEER system will reduce your electric bill approximately 7% - 8% more than a 14 SEER system.

If you are installing a heat pump with a backup heat source which will be a fuel furnace , you will need to install an electronic all fuel kit.  This kit switches between the two heat sources as needed and prevents both the heat pump and backup heat from running at the same time. Alternatively, you can install the Honeywell VisionPro 8000 (TH8320U 1008) thermostat which has the all-fuel kit functionality built into it already, in which case an external all-fuel kit would not be needed.

Need help putting a complete system together? Use our easy System Selector and we’ll do it for you! Please note that this equipment comes pre-charged with liquid refrigerant and that by federal law you must be EPA certified to handle the refrigerant. Yes, you can purchase this equipment without being certified. And, if you are mechanically inclined you can perform about 90% of the equipment installation yourself. However, you must have a professional heating/cooling contractor do the final part of the installation which requires managing the refrigerant.

For Tips for Selecting Matched Components and Line Sets click here.

Standard Features

• High-efficiency Copeland^® scroll compressor with internal pressure relief valve
• R-22 refrigerant-charged for 15’ of refrigerant lines
• Liquid refrigerant return protection
• 850 RPM condenser fan motor
• Factory-installeded bi-flow liquid line filter dryer
• Low-pressure switch
• Reliable, time-initiated, temperature-terminated defrost control
• Brass liquid and suction line service valves
• Contactor with lug connection
• Ground lug connection
• ARI Certified
• ETL Certified

Cabinet Features

• Unique Goodman^® sound control top design
• Steel louver coil guard
• Heavy-gauge galvanized-steel cabinet
• Attractive Architectural Gray powder-paint finish with 500-hour salt-spray approval
• When properly anchored, meets the 2001 Florida Building Code unit integrity requirements for hurricane-type winds

A federal energy efficiency tax credit of up to $1,500 is available for this product if placed in service from January 1st, 2009 to December 31st, 2010, and paired with indoor forced air equipment that gives the system 15 SEER, 12.5 EER and 8.5 HSPF ratings. The tax credit covers 30% of the equipment, installation supplies and labor costs up to $1500.